The printer continues to print and supply ink, making the printer more convenient to use and easy to operate, but how to add the wrong ink and how to deal with it? Next, we will explain it to you in detail.
Inks with different properties cannot be mixed. If water-based inks and weak solvent inks are mixed, the two inks will react chemically to form deposits, which will block the ink supply system and print heads.
In addition to inks with different properties can not be mixed, the same properties of inks produced by different manufacturers can not be mixed.
When you accidentally add the wrong ink to the printer, you must first determine which part of the ink supply system the newly added ink enters, and then make different treatments according to the specific situation.
Approach
1. When the ink has just entered the ink cartridge and has not yet flowed into the ink supply ink path: in this case, you only need to replace the ink cartridge or clean the ink cartridge.
2. When the ink enters the ink supply ink path and has not yet entered the print head: In this case, the entire ink supply system, including the ink cartridge, ink tube and ink sac, should be cleaned, and these parts can also be replaced if necessary.
3. When the ink enters the print head: at this time, in addition to cleaning and replacing the entire ink circuit (including ink cartridges, ink tubes, ink sacs, and ink stacks), it is also necessary to remove the print head of the printer immediately and clean it with cleaning fluid.
