Why do the same equipment and the same print head, the print head of some users can be used for a long time, while the print head of some users is always replaced frequently?
The main reason is related to whether the user's daily protection and maintenance of the print head is in place. If the print head of the printer has a long service life and is always in the best working condition, these daily protection and maintenance work cannot be less.
10 Maintenance Tips
1. Shut down according to the prescribed procedure: when shutting down, first turn off the control software, and then turn off the main power switch to ensure that the trolley returns to its normal position, to ensure that the print head and the ink stack are completely closed to avoid clogging the print head.
2. When replacing the ink stack core, it is recommended to use the original ink stack core, otherwise the ink core may be deformed, which may cause the nozzle blockage, ink breakage, incomplete ink extraction, and incomplete ink extraction. If the equipment is not used for more than three days, please clean the ink stack core and waste ink tube with cleaning solution to prevent drying and clogging.
3. It is recommended that you use the original original ink, and it is strictly forbidden to mix the ink of two different brands to avoid chemical reaction, block the nozzle and affect the picture quality.
4. Do not plug and unplug the USB printing cable with power on, so as not to cause damage to the motherboard.
5. If the machine is a high-speed printer, please be sure to connect the ground wire: ①When the air is dry, the static electricity problem cannot be ignored. ② When using some inferior materials with strong static electricity, static electricity may be generated, which may lead to damage to the safety of the electronic components of the machine and the print head, and the static electricity will also cause the phenomenon of ink flying during printing. It is forbidden to operate the print head with electricity.
6. Because this equipment is a precision printing equipment, it is recommended to be equipped with a brand voltage stabilizer with a power of about 2000W.
7. The ambient temperature is kept at 15℃-30℃, the humidity is 35%-65%, keep the working environment clean and avoid dust.
8. Scraper: Regularly clean the ink stack scraper to prevent ink solidification from causing damage to the print head.
9. Working platform: keep the table free of dust, ink and sundries to prevent scratching the print head.
10. Cartridge: Close the cover immediately after filling the ink to prevent dust from entering.
The print head is the core component of the printer's printing. Do a good job in the daily maintenance of the print head, so that the equipment can work better and improve production efficiency; at the same time, it can save costs and increase profit margins.
