As friends in the clothing printing industry know, white ink hot stamping printers are very important for the temperature and humidity of the working environment. The obvious impact of temperature reduction on white ink hot stamping printers is that the nozzle is prone to blockage, leading to phenomena such as ink breakage, needle skipping, oblique spraying, and flying ink during printing. This is because the viscosity of the ink increases with the decrease of temperature, and the ink droplets condense on the spray hole, resulting in mild blockage. Only by cleaning the nozzle can the problem be solved. If it is severely clogged, then the only way is to replace the nozzle with a new one.
In winter, when the temperature is low, the humidity will also be relatively low. Dry air can easily lead to edge warping during white ink hot stamping printing, and in severe cases, it may cause damage to the nozzle and motor. So it is necessary to pay special attention to the temperature and humidity of the working environment of the white ink hot stamping printer. The temperature range suitable for Kangyin white ink hot stamping printer is between 18 ℃ -30 ℃, and the humidity range is between 35% -65%. In dry weather conditions, do not place the white ink hot stamping printer outdoors. If the temperature in the operation room of the white ink hot stamping printer is low, air conditioning can be used to increase temperature and humidity.
Maintaining the Kangyin white ink hot stamping printer well can effectively reduce printer failures, and it is also necessary to pay attention to the daily maintenance work of the equipment to avoid dust accumulation. After the device finishes printing every day, it can be covered with a dust-free cloth to reduce the invasion of dust. Finally, attention should be paid to the cleanliness of accessories. The nozzle needs to be cleaned before and after printing work to ensure that the nozzle is in good condition before starting printing work or turning off the printer.
